Pack of 20 (Twenty) threaded inserts. These create much more convenient and professional parts than using “captive nuts” (where you have to design a slot…

Assortment of the most common sizes of our threaded inserts in Imperial  (Inch) sizes. A great starting point for taking your 3D printed products to…

This is essentially an Arduino Mega 2560 scaled down to 36.5×51.5mm (drasically smaller than the standard version). Since the USB port was removed to save…

1/4-20 threaded adapter, female-female FF gender changer Used when you have a male thread but need a female. For example, photography light stands typically have…

LSI/CSI LS7366R quadrature counter IC in DIP package This is a popular chip for reading quadrature encoders (such as those used on servo motors  and other position…

18MM diameter body, 8MM inductive proximity sensor Popular as a sensor for bed level compensation in 3D printers, widely used in other applications as well.…

2 Meter Ribbon Cable for the Raspberry Pi camera module The cables that typically come with these cameras have almost always been too short for…

*** DUAL Kit – 2 hotends, 2 All-Metal throats, + 2M Tubing *** E3D V6 hotend with Bowden fitting Installation typically requires custom printer modifications…

*** PLEASE NOTE THAT THE SILKSCREEN (PIN lABELS) ON THESE TRANSCEIVERS IS REVERSED FROM FRONT TO BACK *** 3.3V CAN Bus Transceiver Interface an Arduino, Raspberry…

3-PACK 40 Pin female header, 2 rows of 20 pins each.  2.54mm / 0.1″ spacing This header has extra long pins which is why it…